Pages - Menu

Showing posts with label DIY craft tutorial. Show all posts
Showing posts with label DIY craft tutorial. Show all posts

Aug 6, 2016

NEW BATCH OF DIY NIGHTLIGHTS with SILICONE DIPPED BULBS


It's time for me to gear up and do another batch of the little night lights with silicone dipped bulbs! 

I'm trying to catch up on these little cuties to stock up the two new booths at the co-op in a neighboring town.  
Here's a link to some I made in a different, grungy, primitive style a while back.

And so here is how I'm doing this new batch.

First, start off by gathering your supplies. 
I get it all at the Dollar Mart except for the 100% silicone which is found at the Dollar General.
------- 

-Night lights without the dimmer detection. Just the basic ones.
-Extra packs of bulbs to make replacement bulbs.
-A short cup, not too deep that you can't reach down to the bottom easily.
-Ground Cinnamon
-String and clothespins to hang bulbs to dry.
-100% tube of Silicone (I strongly recommend only getting the 100%!) & a caulking gun which squirts out the silicone.
--------

Okay, after all supplies are gathered, start by putting up your string and clothespins to have them ready. Thankfully I have a  year round clothesline just outside my kitchen. And I use that.

Then mix up your silicone mixture.  I use these little plastic disposable cups that come in large packs for a $1.  They are short enough and small enough to hold a good grip on.
 Squirt out about 3/4 of the cup full of the 100% silicone and stir in the other 1/4 with the ground cinnamon.

Then immediately stick in one bulb, straight down into the mixture, give it a twist as you are bringing it out and up and bam, that's it!

Don't worry if you can't get a cute tip on it, it does take a few good tries to get it down.

Then go hang them to dry.  Thankfully the silicone dries fast.  But I usually leave them hanging for about 4 or 5 hours to make sure it's cured, in the sun.




And later on that night I start painting the bases of the night lights in different colors. I usually prefer black, white or soft colors like buttercup yellow.  

I just think those are more of a prim color theme.

After painting them, I tie on a bit of homespun fabric 


and sometimes glue on accent pieces like metal stars.
I use E-6000 glue from Walmart. It's a strong, forever hold.

And that's it.  Stick the hand dipped silicone bulb in to finish them off and here we go.
A cute little primitive nightlight with hand dipped silicone bulbs.



And here is a night shot of it all lit up.
The cinnamon gives it a warm, soft glow.
$3.00 each

I'm not going to put these in baggies to sell.  I'm just going to tie a cute tag to them and sit them in a bowl, probably.

I'm still pricing these for $3.00 each and the packs of replacement bulbs are priced for  2 for $3.00.

These make for great craft fair and booth items to sell since they are so cute and affordable.  I hope ya'll give them a try!

Happy Crafting,
until next time!
~Lisa






Always make sure you use the correct wattage bulb for each of your night lights and candles when changing out bulbs! 
These nightlight bulbs are 4 WATS.

Aug 21, 2015

Mason Jar Soap Dispeners


I made some of these Mason Jar Soap Dispensers a few years ago, but in a different style, for my craft booth.
These I made in 2013 with cute homespun and wooden stars & rusty bells.

 And still today, they are great sellers.
I guess mainly because of the cool, Mason jars. They are just so country and cute, everyone seems to love them. I know I sure do.

Here is the basics of how I made these and what you may need.
-Ball Jars
-Soap Pump Dispenser 
(I bought the pre-made plastic ones with hand soap already in them, just toss the plastic container.) 
-Screwdriver and Hammer
-E-6000 Glue

This is the $1.00 Silk brand soap bottle I bought so I could get the foaming pump for one of them.
In the pic below, I'd already punched a whole and put the pump in the mason lid though.
Here is where I needed a screwdriver to start the hole.
I made sure to lay it outside right on top of a crack between the boards,
so that when it went through, it would hit the crack.
 A drill would have worked, but I didn't have one handy and my husband was at work.
But the screwdriver, hammer and pliers did the job.
 After the first couple punches.
 And then I started using the pliers to pinch it away and make the hole bigger.
 It really only took about 4 or 5 minutes. The lid metal peals back pretty easily.
And then after I got the hole the right size, (remember, this one above is for a foaming pump which is a lot bigger than the regular ones,) I needed to glue it in place.
 Place the glue on the plastic and let it get all over the metal lid too.
I needed to use a very strong holding glue, so I went with the E-6000 from Walmart. The only
thing with that glue is that it needs to sit and cure for around 24 hours. So glue it and get on to other crafts for a bit.

And here it is from the front.
OH, POINT OF INTEREST!
Notice my lids and rims are almost black. That is because I bought some Rustoleum spray paint and previously sprayed them a Rubbed Bronze color.

I just didn't like the shiny gold, regular rims for these jars.
 They are a deeper, metallic, rubbed color in person. Way prettier than this pic looks.

Then just fill up the jar, after letting that dry for 24 hours,
 and stick the metal ring on to hold it in place.
And you are done.
 And here that one is:

I finished it off with jut twine and a grungy tag I previously made.

And then for the red one, I used one of those pre-made lids especially made for Ball jars.
Here is how it looks.
Here is the lid out of the pack. I got it at a Burkes Outlet store for a little over $2.00, but it wouldn't be cost worthy to buy lots of these for that price. So I will stick to making my own like above.
I just had to pick a cute color for the soap, my kitchen is red, so  I found some $1.00 Apple Crisp shampoo and used that.

Just fill and stick it together.
 And that is all for that one!





Notice this soap looks watery. It's because it is the foam dispenser pump.
A very cute Mason Jar craft to do!
I am keeping one of the red ones for my kitchen!

See ya'll next time!
~Lisa